Stove Builder International 1.7 Series - Blackcomb II

Stove Builder International 1.7 Series - Blackcomb II is a non-catalytic wood stove from Stove Builder International certified at 1.3 g/hr particulate emissions with 70% HHV efficiency and a 15,650–23,300 BTU/h output range (previously certified, no longer in production).

Previously certified (out of production). This model appears in the EPA Certified Wood Heater Database but is no longer on the current certified list, which usually means it is no longer manufactured. The specifications below are its certified figures, kept for reference and for owners of installed units. Browse currently certified heaters for models sold new today.

General
Appliance type wood-stove
Combustion technology Non-Catalytic Stove
Certified fuel Cord Wood
Covered model numbers 1.7 Series - Blackcomb II, Harmony 1.7, HEI170, HES170, Solution 1.7, Osburn 1700, Inspire 1700, Escape 1500, Escape 1500-I, Solution 1.7-I, Destination 1.7-I, Osburn 1700-I, Matrix 1700-I, Inspire 1700-I
Emissions
Emission rate 1.3 g/hr
Carbon monoxide 0.97 g/min
Efficiency
Efficiency (HHV) 70 %
Heat output
Heat output (low) 15650 BTU/h
Heat output (high) 23300 BTU/h
Firebox volume 1.44 cu ft
Certification
25C tax credit eligible (≥75% HHV) No
2020 NSPS compliant No
Currently in production No
EPA certification number 132-18

What space does the Stove Builder International 1.7 Series - Blackcomb II suit?

Similar wood stoves

Frequently asked questions

Is the Stove Builder International 1.7 Series - Blackcomb II EPA certified?

The Stove Builder International 1.7 Series - Blackcomb II holds EPA certification number 132-18 but is no longer on the current certified list — it is previously certified, which usually means the model is out of production. Already-installed units are unaffected by that status in most jurisdictions.

What is the Stove Builder International 1.7 Series - Blackcomb II's emission rate?

The Stove Builder International 1.7 Series - Blackcomb II is certified at 1.3 grams of particulates per hour (tested with cord wood). Real-world emissions depend heavily on fuel moisture and operation — the lab figure assumes seasoned fuel and correct air settings.

How many square feet can the Stove Builder International 1.7 Series - Blackcomb II heat?

Roughly 650–950 sq ft, estimated from its 23,300 BTU/h peak output at 25–35 BTU/h per square foot. Insulation, climate, ceiling height, and floor plan move this figure substantially in both directions.

Does the Stove Builder International 1.7 Series - Blackcomb II qualify for a federal tax credit?

No — the federal 25C credit for biomass stoves was terminated for property placed in service after December 31, 2025. The Stove Builder International 1.7 Series - Blackcomb II's certified efficiency is 70% HHV, which did not meet the credit's ≥75% HHV threshold while it existed. State and local incentive programs may still apply — check your state energy office and air district.

Sources