Pacific Energy Fireplace Products Limited FP30 LE
Pacific Energy Fireplace Products Limited FP30 LE is a non-catalytic wood stove from Pacific Energy Fireplace Products Limited certified at 1.7 g/hr particulate emissions with 69% HHV efficiency and a 13,684–65,631 BTU/h output range (previously certified, no longer in production).
Previously certified (out of production). This model appears in the EPA Certified Wood Heater Database but is no longer on the current certified list, which usually means it is no longer manufactured. The specifications below are its certified figures, kept for reference and for owners of installed units. Browse currently certified heaters for models sold new today.
| Appliance type | wood-stove |
|---|---|
| Combustion technology | Non-Catalytic Stove |
| Certified fuel | Cord Wood |
| Covered model numbers | FP30 LE, FP30AR LE |
| Emission rate | 1.7 g/hr |
|---|---|
| Carbon monoxide | 1.7 g/min |
| Efficiency (HHV) | 69 % |
|---|
| Heat output (low) | 13684 BTU/h |
|---|---|
| Heat output (high) | 65631 BTU/h |
| Firebox volume | 2.74 cu ft |
| 25C tax credit eligible (≥75% HHV) | No |
|---|---|
| 2020 NSPS compliant | Yes |
| Currently in production | No |
| EPA certification number | 274-20 |
What space does the Pacific Energy Fireplace Products Limited FP30 LE suit?
- Its 65,631 BTU/h peak output covers roughly 1,900–2,650 sq ft at the 25–35 BTU/h-per-square-foot rule of thumb — see the sizing calculator to adjust for your insulation and climate.
- The 2.74 cu ft firebox puts it in the mid-size home class.
- Rough fuel use: about 3.1 cords per season at the midpoint of its output range (8 burn-hours/day, 150-day season, 22 MMBtu/cord — see methodology).
- Certified burning Cord Wood — the test fuel closest to real-world firewood.
Similar wood stoves
- Stove Builder International 15-W06 (1.8 g/hr)
- Travis Industries Large Flush Wood Insert (1.7 g/hr)
- Travis Industries Endeavor (1.4 g/hr)
- United States Stove Company TR007E (1.3 g/hr)
- Travis Industries Liberty (2.5 g/hr)
- United States Stove Company US2000E (1 g/hr)
Frequently asked questions
Is the Pacific Energy Fireplace Products Limited FP30 LE EPA certified?
The Pacific Energy Fireplace Products Limited FP30 LE holds EPA certification number 274-20 but is no longer on the current certified list — it is previously certified, which usually means the model is out of production. Already-installed units are unaffected by that status in most jurisdictions.
What is the Pacific Energy Fireplace Products Limited FP30 LE's emission rate?
The Pacific Energy Fireplace Products Limited FP30 LE is certified at 1.7 grams of particulates per hour (tested with cord wood). Real-world emissions depend heavily on fuel moisture and operation — the lab figure assumes seasoned fuel and correct air settings.
How many square feet can the Pacific Energy Fireplace Products Limited FP30 LE heat?
Roughly 1,900–2,650 sq ft, estimated from its 65,631 BTU/h peak output at 25–35 BTU/h per square foot. Insulation, climate, ceiling height, and floor plan move this figure substantially in both directions.
Does the Pacific Energy Fireplace Products Limited FP30 LE qualify for a federal tax credit?
No — the federal 25C credit for biomass stoves was terminated for property placed in service after December 31, 2025. The Pacific Energy Fireplace Products Limited FP30 LE's certified efficiency is 69% HHV, which did not meet the credit's ≥75% HHV threshold while it existed. State and local incentive programs may still apply — check your state energy office and air district.
Sources
- cfpub.epa.gov (retrieved 2026-07-23)