Pacific Energy Fireplace Products Limited FP25LE

Pacific Energy Fireplace Products Limited FP25LE is a non-catalytic wood stove from Pacific Energy Fireplace Products Limited certified at 1.4 g/hr particulate emissions with 67% HHV efficiency and a 11,005–51,530 BTU/h output range (previously certified, no longer in production).

Previously certified (out of production). This model appears in the EPA Certified Wood Heater Database but is no longer on the current certified list, which usually means it is no longer manufactured. The specifications below are its certified figures, kept for reference and for owners of installed units. Browse currently certified heaters for models sold new today.

General
Appliance type wood-stove
Combustion technology Non-Catalytic Stove
Certified fuel Cord Wood
Covered model numbers FP25LE, FP25AR LE
Emissions
Emission rate 1.4 g/hr
Carbon monoxide 1.6 g/min
Efficiency
Efficiency (HHV) 67 %
Heat output
Heat output (low) 11005 BTU/h
Heat output (high) 51530 BTU/h
Firebox volume 2.1 cu ft
Certification
25C tax credit eligible (≥75% HHV) No
2020 NSPS compliant Yes
Currently in production No
EPA certification number 252-19

What space does the Pacific Energy Fireplace Products Limited FP25LE suit?

Similar wood stoves

Frequently asked questions

Is the Pacific Energy Fireplace Products Limited FP25LE EPA certified?

The Pacific Energy Fireplace Products Limited FP25LE holds EPA certification number 252-19 but is no longer on the current certified list — it is previously certified, which usually means the model is out of production. Already-installed units are unaffected by that status in most jurisdictions.

What is the Pacific Energy Fireplace Products Limited FP25LE's emission rate?

The Pacific Energy Fireplace Products Limited FP25LE is certified at 1.4 grams of particulates per hour (tested with cord wood). Real-world emissions depend heavily on fuel moisture and operation — the lab figure assumes seasoned fuel and correct air settings.

How many square feet can the Pacific Energy Fireplace Products Limited FP25LE heat?

Roughly 1,450–2,050 sq ft, estimated from its 51,530 BTU/h peak output at 25–35 BTU/h per square foot. Insulation, climate, ceiling height, and floor plan move this figure substantially in both directions.

Does the Pacific Energy Fireplace Products Limited FP25LE qualify for a federal tax credit?

No — the federal 25C credit for biomass stoves was terminated for property placed in service after December 31, 2025. The Pacific Energy Fireplace Products Limited FP25LE's certified efficiency is 67% HHV, which did not meet the credit's ≥75% HHV threshold while it existed. State and local incentive programs may still apply — check your state energy office and air district.

Sources